Asus P8Z68 Lucid Virtu Problem

[esudip]

Hello All,

I just brought an Asus P8Z68-V Motherboard and an Intel i5-2500K processor but I am unable to start Lucid virtu when I connect the VGA cable to PCI-E Graphics card (d-Mode) but it works well when I connect VGA to Motherboard (i-mode).

When I try to run Lucid-Virtu the error occurs " No Intel HD Sandy bridge family Graphics Family device was found "

I these made configuration to bios
1) iGpu for i-mode
2) PCI-E/PCI for d-mode

i also made this PCI/iGpu
But all this not worked well

The screen shot attached when I booted machine with PCI-E i.e. d-mode.

 

[hrbngr2]

esudip,
though it might take a while to get a reply, I would recommend you post this in the overclock.net forums under the Asus P67/ Z68 mobo thread or head over to the Asus Republic of gamers forum and make a post there for more direct support.

http://www.overclock.net/intel-motherboards/1012874-official-asus-p8p67-p8z68-series-owners.html

http://www.asusrog.com/forums/forumdisplay.php?108-NON-ROG-Intel-Motherboards

good luck.

 

[Binky]

Did you try uninstalling and reinstalling the virtu software? I had an issue like this and it resolved itself after I reinstalled.