ASUS P4T-E SOS question!

[dbal]

I am only one day before ordering the ASUS at my local store and while searching its manual that I ve downloaded from their web site, I can't find anywhere the classic setting about the FSB/AGP ratio. Should I think that it's fixed to 2/3 since it's made for the P4 with the 100Mhz FSB and that gives us the nominal 66 for the AGP bus?? If it is so, I might have to change my selection cuz at some time, for sure, the 1,5G P4 I 'll get, will go for higher FSB speeds that the graphics card might not be able to stand at that setting....
On the other hand I wonder, how can they forget an option like this on such a great performer like this m/board.....? Am I blind or sth????

 

[AndyHui]

The ASUS P4T-E has an automatic divider setting for the AGP at 120MHz. At 120MHz and above, the divider will automatically switch to 1/2. Software BIOS controlled ASUS boards do not provide a manual AGP setting.

 

[dbal]

Thanx a lot! That means setting the FSB@133 the AGP will be down to 133/2=66.5 by the mobo right?
And something more....Does this ASUS read the cpu temp from the pentium's on die thermal diode?

 

[AndyHui]

The answer is YES for both questions.