Hi,
I have P3V4X with 1005 BIOS and Cel300A. Before I damaged my generic slotket I can oc this Cel to 567 with temp stayed @ 27C idle and @ 45 under high load and could run 3dmark99. Now I use Asus Slotket S370-133 rev. 1.01 and the Cel run @ 585 stabil in windows (seti & prime) but can't pass 3dmark99 test. The worst thing is the temp jump to 42C idle and +70C under high load. One note though, the generic slotket has 4 holes around 4mm inside the socket area and the asus doesn't. Is this what make the temp higher? Oh yeah, I use FOP32 and thermal grease.
One more question, I have MBM 4.18, 4.17 and Asus Probe 2.11, 2.12. The voltage reading on this motherboard with mbm always reads my 12V around 13-13.6V and 3.5V around 3.66V. I know this isn't correct because Asus Probe and the BIOS shows the same thing. Does anyone has this problem with mbm?
Thanks,
Martin
NB: sorry for my poor english =>
I have P3V4X with 1005 BIOS and Cel300A. Before I damaged my generic slotket I can oc this Cel to 567 with temp stayed @ 27C idle and @ 45 under high load and could run 3dmark99. Now I use Asus Slotket S370-133 rev. 1.01 and the Cel run @ 585 stabil in windows (seti & prime) but can't pass 3dmark99 test. The worst thing is the temp jump to 42C idle and +70C under high load. One note though, the generic slotket has 4 holes around 4mm inside the socket area and the asus doesn't. Is this what make the temp higher? Oh yeah, I use FOP32 and thermal grease.
One more question, I have MBM 4.18, 4.17 and Asus Probe 2.11, 2.12. The voltage reading on this motherboard with mbm always reads my 12V around 13-13.6V and 3.5V around 3.66V. I know this isn't correct because Asus Probe and the BIOS shows the same thing. Does anyone has this problem with mbm?
Thanks,
Martin
NB: sorry for my poor english =>
Facebook
Twitter