Asus P2B motherboard owner, I have an Upgrading & Overclocking article for you

[WalkingDead]

My Article

This article goes over on how to upgrade the CPU to a Coppermine PIII or Celeron II and overclocing it too.

Enjoy

 

[Eug]

Good article, but just a few points:

1) Not all Coppermine PIII's and Celeron's run at 1.6 V, as you know.
2) Rev 1.12 motherboards should be fine at x.x5 voltages from what I'm told (not that I've ever seen one).
3) Some earlier motherboards are fine at 1.6 V.

Oh, and it's actually "flash" the BIOS, not "flush".

Eug

Celeron 533A@880 1.8 V (65% overclock - what I run now because I don't play games anymore)
Celeron 533A@920 1.9 V (73% overclock)
Also ran 533A@960 1.9 V for a day (80% overclock!)

 

[BoberFett]

Yeah, good article. I wish it had been around 6 months ago.

I've got a rev 1.02 also, that overclock is pretty impressive. I'm currently using a Cel 533 @ 824 (103 FSB) and it's been totally stable and runs very cool, even at 1.8v. I use a G.Orb for cooling and an MSI 6905 slocket.