- Apr 12, 2006
- 2
- 0
- 0
I have an old Asus P2B-DS mobo rev1.04 that's not booting completely.
It stops at the SCSI check with the following.
Adaptec SCSI BIOS v3.00
IC-7890 A at slot 00, 00:06:00 - SCSI termination not found.
The SCSI drive has been removed and the SCSI cable is not attached to the mobo. How do I properly terminated the SCSI?
I've checked the manual but I couldn't find anything on terminating the SCSI.
Any help would be greatly appreciated.
Thanks,
Gord
It stops at the SCSI check with the following.
Adaptec SCSI BIOS v3.00
IC-7890 A at slot 00, 00:06:00 - SCSI termination not found.
The SCSI drive has been removed and the SCSI cable is not attached to the mobo. How do I properly terminated the SCSI?
I've checked the manual but I couldn't find anything on terminating the SCSI.
Any help would be greatly appreciated.
Thanks,
Gord
