I have the ASUS M2N-E SLI motherboard and the Patriot Extreme Performance DDR2 800 RAM with 4-4-4-12 timings. I recently read that it's not at 4-4-4-12 but 5-5-5-16 unless you set the voltage to 2.2v. So, after hearing this I went into CPU-Z and checked and sure enough it was running at 5-5-5-16. Now, I go into my motherboard's BIOS settings and it turns out that I can only up the voltage for the ram to 1.95v. Is there some way that I could get it up to 2.2v, or some way to make it run at 4-4-4-12?
Another thing that I don't know is under DRAM configuration. There are a lot of things there and I'm not sure what they do exactly I was wondering if I could use these options to set the latency.
Trcd [3-6]
Trp [3-6]
Tras [5-11]
Trc [11-17]
Twr [3-6]
Trrd [2-5]
Trwt [2-8]
Twtr [1-3]
Trtp [2/4, 3/5]
Twrrd [0-3]
Twrwr [1-3]
Trdrd [2-5]
Trfc [0-3]
1T/2T Memory Timing [1T, 2T]
Any help would be appreciated.
Another thing that I don't know is under DRAM configuration. There are a lot of things there and I'm not sure what they do exactly I was wondering if I could use these options to set the latency.
Trcd [3-6]
Trp [3-6]
Tras [5-11]
Trc [11-17]
Twr [3-6]
Trrd [2-5]
Trwt [2-8]
Twtr [1-3]
Trtp [2/4, 3/5]
Twrrd [0-3]
Twrwr [1-3]
Trdrd [2-5]
Trfc [0-3]
1T/2T Memory Timing [1T, 2T]
Any help would be appreciated.
Facebook
Twitter