Asus Cubx

Raptors

Member
May 6, 2000
58
0
0
I'm asking a little help as I only have a one minor problem CMD-Controller Driver that one comes from Asus CD, Where I been after installation while on WindowSE After reboot system then somehow gotten caught into single crash and I had safe-mode and remove one cmd controller driver back in normal no yet with ATA-66 enable ?

Does Anyone whose has the Cubx their successfully installation with CMD-Controller Driver ?
 

Dennis Travis

Golden Member
Oct 9, 1999
1,076
1
81
Raptors, I got the 98 CMD driver working without a problem. It's the one for Win 2k that gave me problems. I am using the driver that came on the Asus CUBX CDROM. I have been trying to find a newer driver for Win 2k but the CMD site has been down for the last 2 days now no matter what ISP I use to try to access them. I Hope they didn't go under! :D

 

bulldawg

Golden Member
Oct 9, 1999
1,214
0
76
I also had no problems getting the CMD driver installed. Just pointed it to the cd and it did the rest by itself.
 

Raptors

Member
May 6, 2000
58
0
0
Okay

It's seem a simliar less problem as yours are both okay, so therefore I today will hopefully to think my head alike your surfing CMD's webpage as I 'll go check with them update and to work on it, I maybe think to check on bio utilities, called Onboard ATA one before to make thing everything to be sure installed it right .

Gulp !
 

Raptors

Member
May 6, 2000
58
0
0
I back
Did Attempted to fix on CMD-Controller Driver, the same problem single crash, take one CMD PCI contoller off on System Device manager then My had noticed at the start-bootup and had noticed IRQ 14/15 IDE Controller at both same Intel IDE Busmaster ?

Anyway I to get rid of this problem, mentioned to format c: drive and reinstall again in one Win98 not SE, Just My try but bad luck that on MS-Dos Mem is low 510 mem and my mentioned use Boot Floppy disk to use format c: cant work at all.

Did boot up on Floppy disk a:\ but wont work a no move to type at all in Ms-dos . Anyhow ? Is this a possible to get to format c:\ ?
What Other Option ? where in WindowsSE of where to format anyhow ?

May require need to have Ms-Dos to be working to type letters My only one need a solution !
 

Raptors

Member
May 6, 2000
58
0
0
I again had been solved on MS-Dos and it work typing and format c: drive and been reinstalled again Win98 and The Same thing on CMD-controller driver after reboot system then it been gone to crash nothing been changed ?

My Had noticed at the First Start reboot and noticed on IRQ 14/15 IDE Controller, What yours on Cubx ? Do have IRQ 14/15 or stand alone only one IRQ 14 or 15 ?

My not too being clear on CMD-Controller to understand how progress are ?

Can you to tell me what installation first ?