ASUS BIOS settings to OC i7 980X ?

[Spike99]

OK... I'll set it at 300 and run it... probably will run it later tonight...

 

[Spike99]

OK, It completed in 38mins with no errors... GFlops were mosty above 66.

I'm going to re-run Prime95 with vcore at 1.35v tonight... and leave it running till the morning to check if I get an errors or not... When I last ran Prime95 with vcore @ 1.35v, I unplugged video plug and mouse to another PC for about 30mins... when I plugged it back... I was not getting anything on the screen so I assumed it BSOD and I reset PC...

 

[Rubycon]

OK, It completed in 38mins with no errors... GFlops were mosty above 66.

I'm going to re-run Prime95 with vcore at 1.35v tonight... and leave it running till the morning to check if I get an errors or not... When I last ran Prime95 with vcore @ 1.35v, I unplugged video plug and mouse to another PC for about 30mins... when I plugged it back... I was not getting anything on the screen so I assumed it BSOD and I reset PC...

No no - you're selecting 300 times to run the 512MB test! Change it to 300 minutes! That will run for five hours.

 

[Spike99]

LOL - Got it..

In any case, I'm going to re-run Prime95 first and see if I get any errors.

 

[Spike99]

OK, So I had left Prime95 running last night and this morning screen was blank... same scenario as last time... I had to restart PC.

Attempted to run Linx by time instead of number of runs... but I could not see how to run by time... so I ran it with run = 500. It generated no errors.

I noticed that I was running an older version of Prime95 ver 25.9 but latest ver is 25.11. Not sure if it's gonna make any difference... but I downloaded latest ver and I'll be re-running.