- Aug 26, 2018
- 35
- 2
- 41
I converted from a TM-AC1900 to an AC68U. I am using Merlin 384.13. When I first set up the AC68U after completing the firmware upgrades, and changed the 2.4Ghz channel to 1, the router was a huge improvement. 2 Firesticks (1 in a different room, same floor and 1 on the next floor up above) were both showing a "very good" signal with 2.4 Ghz (and streaming was actually confirmed as significantly improved - super smooth where it would normally skip with older router).
I decided to try to move the router closer to the firestick (located on same floor) to take advantage of the 5ghz connection. That did not work out so well for the rest of the house, but when I moved it back to the initial location and settings, all of my connections are terrible now. Both firesticks are now showing "marginal" signal on this router. This router is now worse than my Asus RT-N66R (which is at least showing "good" as opposed to "marginal"). I tried to reset to default settings and start again, but same issue. When I pull up the "view list" for connected "clients", both firesticks are shown as 3 bars (out of a total 4).
I dont know what to do. Is this just a bad router? It went from a beast to complete garbage in just 1 day. can someone help me diagnose and possibly fix the problem? I was so impressed at how great it was initially running. How can it have a worse range than my Asus RT-N66R? That...and the Asus RT-N66R is disrupted when our microwave runs ...lol
I found this:
www.dslreports.com
I decided to try to move the router closer to the firestick (located on same floor) to take advantage of the 5ghz connection. That did not work out so well for the rest of the house, but when I moved it back to the initial location and settings, all of my connections are terrible now. Both firesticks are now showing "marginal" signal on this router. This router is now worse than my Asus RT-N66R (which is at least showing "good" as opposed to "marginal"). I tried to reset to default settings and start again, but same issue. When I pull up the "view list" for connected "clients", both firesticks are shown as 3 bars (out of a total 4).
I dont know what to do. Is this just a bad router? It went from a beast to complete garbage in just 1 day. can someone help me diagnose and possibly fix the problem? I was so impressed at how great it was initially running. How can it have a worse range than my Asus RT-N66R? That...and the Asus RT-N66R is disrupted when our microwave runs ...lol
I found this:
AC68U extremely poor signal strength - Wireless Networking | DSLReports Forums
Forum discussion: Hi, I recently purchased a ASUS AC68U router flashed to Merlin 380.63_2. The router performed fine on both the 2.4GHZ and 5GHZ band, the signal was strong (full bars on my S6). However, I noticed that the signal strength have degraded significantl

Last edited by a moderator: