Asus A8V Deluxe & 3500+: no BIOS multiplier setting

imported_mortimer

Junior Member
Nov 13, 2004
2
0
0
I have an Asus A8V Deluxe Rev 2 w/the 1008 BIOS rev. and a Winchester 3500+ (90nm).

When I set AI Overclocking to manual, I only get five options:
CPU FSB Freq
AGP/PCI Freq
DDR Volt
AGP Volt
V-Link Volt

By all accounts, others with a similar setup also see CPU Multiplier and a couple other options. Is there a change somewhere else that will enable these options? I went straight from the 1006 rev to 1008 when I got this mobo, so I'm not sure if these options were present w/1007.

Thanks for any help
 

effee

Golden Member
Sep 4, 2004
1,797
0
0
I have another question, does the 3500 clock at around 2.2ghz? Wouldnt that make it the same as the 3200 (754) which also clocks at 2.2ghz? Whats the increase then except dual channel ram?
 

Sylvanas

Diamond Member
Jan 20, 2004
3,752
0
0
you cant change the multiplier with the mainstream A64's anyway only with the FX series.
 

Squally Leonharty

Senior member
Oct 5, 2004
237
0
0
Actually, you can change the multiplier on all A64 CPU's. It's just that the regular A64's are locked upwards, but the multiplier can be changed to a smaller value and back to the original value (that's what CnQ does). Only the FX series are fully unlocked.