ASPEED AST2500 DDR4 256GB

[dsplover]

Built into the new workstation X470 mATX board from ASRock.
Can I use this just for basic non motion 2D monitoring of a Virtual Mixer for an Audio App.
If so I won’t have to buy a 1U Chassis with 2 x FULL HEIGHTH/FULL LENGTH slots for a GFX Card.

Below is a Picture of the Mixer I made that I occasionally have the need for a manual over ride, otherwise it’s totally automated by the 88 note Master MIDI Controller.

Thanks

 

[Stuka87]

Your question is worded a bit strangely. But if I get what you are asking, if the CPU you chose has onboard graphics, it will display whatever you need from a 2d standpoint just fine.

 

[dsplover]

3700X is what I’ll be using, no GFX.
The motherboard has the ASPEED AST2500 DDR4 256MB graphics chip.
This is what I’m hoping might be capable of the meager Visuals I require,
If not I can still use a skinny card and the PCI-e 1X Audio Card on a riser in my 1U ATX Chassis.
I’ve got 1 slot chassis laying around I’d rather use, which is why I Hope this built in GFX on the ASRock board would be enough.

At the bottom of my racks is the 1U Chassis I have a few of.
Supermicro CSE-512-600Bs. I like these. The dual slot PCI Chassis I could use is 275 bucks w/ PSU.

Don’t want to buy one if I don’t have to.

 

[Bouowmx]

Not much discussion on the Internet. Specs say the ASPEED AST2500 can be equipped with up to 1 GB memory; so it has enough memory for a bunch of basic windows in MS Windows.

 

[Micrornd]

Yes, it will work fine.
My workstation uses the AST2400 and has no problem keeping up at 1920x1200 @ 60 for all work applications.
You won't be playing anything but the most basic games though (if you do that while the machine is compiling )

 

[dsplover]

Thanks Micrornd.
I’ve seen these forever on Supermicro boards and never tried them
Just wanted somebody who has, so thanks.

1U AMD 3700X @ 65 watts is going to a sweet build.

Cheerz