Are these #'s right about normal?

[rootaxs]

I've been testing my new rig the past 2 days and this is what i get running Prime95. Are the temp's and voltages good enough for the system listed below? ---> Click for stats

Thanks.

Rig:
KT3 Ultra2
XP1700+ (Palomino)
Cooler Master DP5-6I3ICA1
256mb DDR333 Samsung (OEM)
Fortron 300w P.S.
DVD, CDRW, 4 Harddrives
Radeon 7000 PCI

 

[pillage2001]

It's about right but you might consider changing your PSU in the future.

 

[rootaxs]

What's wrong with the PSU?

 

[ChampionAtTufshop]

Originally posted by: rootaxs
What's wrong with the PSU?

nothing is really wrong with it,its just running a bit low on the voltage rails

for future upgrades/overclocking/stability's sake you could upgrade psu, however if its working now then why bother unless it isnt stable when overclocking (if you even plan to do so....it probably wont be looking at your +5v line)

 

[rootaxs]

Thanks for the explanation.

The 5v rail goes only that low, on average it stays at 4.85v while the 3.3v rail is dead-on no matter what the load. I probably won't be doing much OC'ing and at the budget i had to work on, the 300w was all i could afford. At least i know it's a good PSU (per Tom's hardware) and has built-in overload protection.