• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Are my voltages right?

Y

yezhou

Senior member
I'm looking at Asus Probe and wondering if my voltages are correct, here are the numbers:

+12V = 11.369

+5V = 5.026

+3.3V = 3.264

Thanks in advance.
 
I think each voltage is supposed to match the intended value, so if you are dippling low, that could be a problem. It's not bad if you tip over a bit, I think. Also, check the voltages in your bios to compare, because my MSI app shows the 12 volt rail as 11.67 - 11.8, while in the bios, it was reading 11.9.
 
What is the most accurate measurement point?

Reason I ask is MBM reported my 5v at 4.1v, and 12v at 11.2v, in my new Antec PS.
Checked in Bios, and it showed the same thing.
Then I measured voltage with my Fluke meter, at the 4 pin drive cable, and 5v was 5.03, while 12v showed 12.19v.

Because both MBM and Bios obtain their results from the motherboard sensors, it does seem like relying on the motherboard to correctly report power supply readings is not the most accurate way to go?
 
Nope havn't been experiencing any problems...no crashes or anything...

I am using Cool & Quiet though...could that be the reason? Thanks.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top