are my voltages (psu) ok?

[Wolfsraider]

prime 95 stable at under 3.20

i ran it 10 hours @ 3150 np

right now :

vcore 1.550 in bios = 1.525 actual

rails as follows


+3.3 @ 2.59
+5.0 @ 4.84
+12.0 @ 12.28
-5.0 @ -5.39
-12.0@ -12.19
150x 21 for 3150
ram timings by speed 2-6-3-3 will run 2-5-2-2
4/5 divider added .10 to voltage on ram
but doesn't make a difference if i don't it will still run fine

psu=generic psu

i was hoping it was the psu

i am only running
1 scsi card and scsi hdd
dvd drive
cdrw drive
ati 9700 pro
1 10/100 card
onboard lan
1 soundcard
4 case fans
1 hdd cooler

trying to go higher but wondering if buying a 430 antec was necessary or if i'm just maxed out?

thanks for looking
mike

 

[microAmp]

Everything looks fine except the 3.3 V

 

[Wolfsraider]

yes

would that limit my ability to overclock?

ie cause :
reboots @ over 3200 mhz up to there i get fine but after that i can be running a benchmark/playing a game and bam back to the bios i go.

i can hear her change pitch like a big motor starting up (drawing amps) when she enters windows some times she will let me play a few games sometimes she reboots at the welcome screen but only above 3200

i found a thread on the epox board that stated the same about the board now i don't know which is the problem the board or the psu?

anybody?