Are my bios setting for OC are correct?

[Haywired2002]

I have Following Hardware :
P5Q-E
E8400
4 GB TWIN 2X 2048 - 6400 C5 DHX

i am using these settings :
AI Overclock tuner: MANUAL
CPU Ratio Setting: AUTO
FSB Frequency: 445
PCI-E Frequency: 100
FSB Strap to North Bridge: AUTO
DRAM Frequency: AUTO
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: AUTO

1st Information: 5-5-5-18-3-54-6-3
2nd Information: 8-3-5-4-6-4-6
3rd Information: 14-5-1-6-6

DRAM Static Read Control: DISABLED
DRAM Read Training: DISABLED
MEM. OC Charger: ENABLED
AI Clock Twister: AUTO
AI Transaction Booster: AUTO

CPU Voltage: 1.32
CPU GTL Voltage Reference (0/2): .630
CPU GTL Voltage Reference (1/3): .630
CPU PLL Voltage: 1.58
FSB Termination Voltage: AUTO
DRAM Voltage: 2.0
NB Voltage: 1.14
NB GTL Reference: .630
SBridge Voltage: 1.1
PCIE SATA Voltage: AUTO

Load Line Calibration: AUTO
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew : AUTO
NB Clock Skew : AUTO
CPU Margin Enhancement: OPTIMIZED

Advanced Settings
C1e: Disabled
Max CPUID Value Limit: Disabled
Intel(r) Virtualization tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled

Post screen Goes Good,
BUt i dont get my Multi Boot screen to VIsta and Xp?

 

[Tweakin]

As per my notes in one of your other many threads, it is a process...read the guide and ask questions...the forum members are here to help assist you, but we can't do it for you.

Just so you know, my current project has been on my kitchen table for almost 10 days doing stress tests and thermal mappings so that I can optimize my system...patience is the key.