Arctic Silver wearing out?

Toggle sidebar Toggle sidebar
P

Pwntcomputer

Senior member
Oct 6, 2005
273
0
0
Has anyone ever heard of this possibility? When I first put my comp together in Dec 2005 my idle temps were in the 27C range with load at 35C.

Lately I have been noticing my processor running significantly hotter. Any ideas? Maybe need to reseat the Typhoon?
 
BassBomb

BassBomb

Diamond Member
Nov 25, 2005
8,390
1
81
You have air sprayed it, have you gotten rid of all the dust though? Open it up, take a look in the heatsink.

In some cases you cannot remove all the dust with a air spray, and if it gets under the heatsink (rare) it can cause problems
 
P

Pwntcomputer

Senior member
Oct 6, 2005
273
0
0
Originally posted by: BassBomb
You have air sprayed it, have you gotten rid of all the dust though? Open it up, take a look in the heatsink.

In some cases you cannot remove all the dust with a air spray, and if it gets under the heatsink (rare) it can cause problems
Click to expand...

I'll give that a shot.
 
F

firebyyrd

Senior member
Mar 15, 2006
761
0
0
Originally posted by: BassBomb
You have air sprayed it, have you gotten rid of all the dust though? Open it up, take a look in the heatsink.

In some cases you cannot remove all the dust with a air spray, and if it gets under the heatsink (rare) it can cause problems
Click to expand...

mine did.
but luckily no problems :)
 
VinDSL

VinDSL

Diamond Member
Apr 11, 2006
4,869
1
81
www.lenon.com
Originally posted by: Pwntcomputer
Phoenix, AZ here too.
Click to expand...
Originally posted by: BassBomb
In some cases you cannot remove all the dust with a air spray...
Click to expand...
I use a dual-stage air compressor @ 125 PSI -- does a damn fine job! :D

You wouldn't believe how much dust a HSF and PSU will collect -- and it doesn't take long!

Personally, I doubt canned air will do jack, if that's what ppl are using... ;)
 
C

Cygnus X1

Senior member
Sep 5, 2005
812
0
71
i use a vacuum cleaner and it does a dam fine job. I run around the house with dry socks(most the time I have jungle foot) and build up lots of static, turn on vacuum then bango-boombo clea.
 
A

A554SS1N

Senior member
May 17, 2005
804
0
0
I haven't touched the heatsink in my dads PC for 2 years, and it hasn't changed it's cooling properties - at least nothing I have noticed. It's either not gained much dust, or it hasn't really affected it as much as I'd think. I never bother to check as there is no reason to - I always keep an eye on temperatures though, so I'd know if things needed cleaning.
 
9

996GT2

Diamond Member
Jun 23, 2005
5,212
0
76
Hmmm...dust hasn't really been too much of a problem for me though...I open up the case about once ever month or two to check inside, but not that much dust has accumulated on the heatsink and other parts in the 10 months since I built this system.

pic:
http://i78.photobucket.com/albums/j120/996gt2/DSC03452.jpg

I guess the amount of dust that gets into one's computer really depends on how clean and dust free that person's house (and perhaps heating/cooling system) is.
 
BassBomb

BassBomb

Diamond Member
Nov 25, 2005
8,390
1
81
Originally posted by: 996GT2
Hmmm...dust hasn't really been too much of a problem for me though...I open up the case about once ever month or two to check inside, but not that much dust has accumulated on the heatsink and other parts in the 10 months since I built this system.

pic:
http://i78.photobucket.com/albums/j120/996gt2/DSC03452.jpg

I guess the amount of dust that gets into one's computer really depends on how clean and dust free that person's house (and perhaps heating/cooling system) is.
Click to expand...

i concur...... my house is soo bad for that
 
B

BladeVenom

Lifer
Jun 2, 2005
13,365
16
0
Also if you move you PC around a lot, you sometimes have to remount the heatsink. Take it off, clean it, reapply, and remount.
 
P

Pwntcomputer

Senior member
Oct 6, 2005
273
0
0
Originally posted by: BladeVenom
Also if you move you PC around a lot, you sometimes have to remount the heatsink. Take it off, clean it, reapply, and remount.
Click to expand...

Thanks everyone! I may just do this, I haven't moved it around much at all, but that Typhoon is heavy and does not techincally fit the DFI boards.

Now if one of you guys can come over and show me how to lay all the tile I bought, I'll be alllll set :)
 
You must log in or register to reply here.

TRENDING THREADS

COMPANY
RESOURCES
FOLLOW
Top Bottom