I am putting together a new system with this PS and though i would share my thoughts. It is going in a Antec 300 case. I am very dissapointed with this PS in a few ways and would never buy again(ever). First the 4pin 12v connector was too short to reach mobo, also the 24pin ATX connector is too short. That in itself is not the end of the world as i thought it might happen because of the bottom mount PS in the Antec 300. However it has the stupidest SATA and MOLEX power cords i have ever seen in my life and i have seen alot, they each have there own loom and ARE ALL ON THE SAME LOOM, the 6 SATA power connectors are about 1-1.5" apart on one loom and the 3 measly molex connectors are about 2" apart on the other loom. You can see how this can be a problem if you have a optical drive high in the case and a HD low, the SATA power connector will not reach both, well it might if you move your optical drive lower but it will be right in the middle blocking airflow with the other sata connectors stretched in between. I have no idea what they were thinking I used to be a computer tech and have seen hundreds of PSU's and even have seen $20 power supply with better cableing than this thing. No wonder they post no pictures of the cables in there site. The only good thing i can say is i got it cheap on sale and the cables are sleeved, if i can return for store credit i will and get a corsair unit. my .02 cents.
oh the PCIe connectors(2x6pin 2x8pin) are good, they are all seperate and long, i have no idea why they screwed up the rest but put thought into them.
oh the PCIe connectors(2x6pin 2x8pin) are good, they are all seperate and long, i have no idea why they screwed up the rest but put thought into them.
