Anyway to push FSB w/o pushin AGP?

[farflondr]

I have a 1600+ which im oc'in right now to 1700+, on a asus a7v266. I had 1600mhz but my vid card (radeon 7500) doesnt benchmark w/ the fsb pushed that far (152 fsb). So I was wondering if theres any way i can push fsb w/o agp? Also what does changin the memory settings (2-2-2-5) do?

thanks

 

[Wind]

Unfortunately NO. The AGP setting on most mobo is either 1/2 for 133 FSB setting OR 2/3 for 100 FSB.

 

[Squisher]

There is a setting on the mobo I just set up yesterday, the Soltek SL-75DRV4, called AGP,PCI,etc. skew. I assume they are to underclock back to their normal settings.

The Iwill XP333-R has an asynchronous bus which allows each bus speed to changed independently.

 

[FreakyGuy]

The IWill XP333 is the only board I know of that has the dividers you wish to seek. You can manually assing the divider. Remember that the AGP is CPU FSB/2 for this board.

So if your running 133/2 your AGP is at 66mhz which is normal. At 152 Mhz your AGP is running at 76 mhz compared to the normal 66mhz.