- Nov 13, 2003
- 159
- 0
- 0
I live by the highway the noise from my computer fans help block the traffic.
I stuck a screw driver in my thermaltake volcano 11.
All I need is the Fan I am fine with this heat sink.
Whats the best fan out there?
80 x 80 x 37 mm
No greater then 37 unless it comes with screws long enough. Lol
Thanks for the help!
Heres the info on the one I just Busted to pieces. :
P/N
A1725
Max. Air Flow
20.55 CFM at 1300 rpm
75.70 CFM at 4800 rpm
Fan Dimension
80x80x37 mm
Max. Air Pressure
1.45mm-H2O at 20°C~
8.43mm-H2O at 55°C
Heatsink Dimension
70x66x40 mm
Noise
17 dB at 1300 rpm
48 dB at 4800 rpm
Rated Voltage
12V
Bearing Type
Two Ball Bearing
Started Voltage
6V
Life Time
50,000 hours
Rated Current
0.04A ~ 0.50A
Interface Material
Thermal Grease
(Dow Corning T340)
Power Input
2.40W ~ 8.40W
Connector
3 PIN
Fan Speed
1300 ±10% RPM at 20°C ~
4800 ±10% RPM at 55°C
So any thing 80 x 80 x 37 or below 37 can be used. Just want your guys opinions The thermaltake cooled great but if buyen a new fan why not go for the fastest !
I stuck a screw driver in my thermaltake volcano 11.
All I need is the Fan I am fine with this heat sink.
Whats the best fan out there?
80 x 80 x 37 mm
No greater then 37 unless it comes with screws long enough. Lol
Thanks for the help!
Heres the info on the one I just Busted to pieces. :
P/N
A1725
Max. Air Flow
20.55 CFM at 1300 rpm
75.70 CFM at 4800 rpm
Fan Dimension
80x80x37 mm
Max. Air Pressure
1.45mm-H2O at 20°C~
8.43mm-H2O at 55°C
Heatsink Dimension
70x66x40 mm
Noise
17 dB at 1300 rpm
48 dB at 4800 rpm
Rated Voltage
12V
Bearing Type
Two Ball Bearing
Started Voltage
6V
Life Time
50,000 hours
Rated Current
0.04A ~ 0.50A
Interface Material
Thermal Grease
(Dow Corning T340)
Power Input
2.40W ~ 8.40W
Connector
3 PIN
Fan Speed
1300 ±10% RPM at 20°C ~
4800 ±10% RPM at 55°C
So any thing 80 x 80 x 37 or below 37 can be used. Just want your guys opinions The thermaltake cooled great but if buyen a new fan why not go for the fastest !
