Anyone using AGP on XP64 with Asrock Dual-SATA2 ?

[Wag]

I looked at the integrated drivers and apparently there is AGP support for XP64.

I'm just curious, once I install them, do I install ATI's XP64 Catalyst drivers for my AGP X800XTPE? Wouldn't the XP64 Catalysts only be setup for PCI-E?

 

[uo7]

I installed the uli agp driver, Reboot, then installed my nvidia drivers.

 

[sandorski]

Using XP64, ULI's AGP driver(or whatever was installed when I ran the Driver disk), and ATI's XP64 drivers. Seems to be working fine, except SMARTGART reports AGP as Off. I just assume that's a SMARTGART issue, but could be wrong.

 

[cool]

dxdiag.exe tells ya what's really goin on... 🙂

 

[Wellsoul2]

Originally posted by: sandorski
Using XP64, ULI's AGP driver(or whatever was installed when I ran the Driver disk), and ATI's XP64 drivers. Seems to be working fine, except SMARTGART reports AGP as Off. I just assume that's a SMARTGART issue, but could be wrong.[/q

Sorry if this issue has already been solved but it drove me nuts.

I could not get Smartgart to work at all. The integrated driver wouldn't load
and XP home kept giving me a PCI to PCI driver instead of AGP.
I could not get the ULI integrated or AGP driver to load.

Finally I identified the AGP driver as device 5 and manually installed it with
the hardware tab in system properties...though I had to manually extract
the AGP file with Winzip.

THe automatic driver install kept saying "64 bit windows has driver already!"

Oh..had to flash my bios to 1.5 for the Opteron but that had nothing to do with AGP.

Another issue..the Sata onboard loads slow..going back to my PCI Sata board..much faster.

 

[grooge]

The AGP drivers if for the AGP bus while the Catalyst are for the video card. So, 1+1=2