Anyone order a 165 from Newegg recently?

[TrevorRC]

With the price bump, Newegg's prices are looking decent right about now. (on the same level as daves)
Anyone know the steppings coming they're shipping?

 

[TrevorRC]

Responses from ANY Company would be welcome.
MWave, Monarch, ZZF, etc.

Anyone?

 

[Lord Banshee]

mine (from newegg) should be in tomorrow

Well post numbers and what not on forums and hopefully a good 2.7Ghz overclock

 

[Mattd46612]

I got mine from newegg a week ago, Have it at 275fsb and its not even breaking a sweat, I forgot to write down the stepptings though.

 

[kindest]

Opty 165 CCBWE 0548XPMW

i got from zipzoomfly last week. getting a dfi board this week to oc it.

 

[Lord Banshee]

HAve it installed but not enough time to test..
I took a picture of the stepping so i'll repost it tomorrow. 0550.....

Right now primeing 2.4@ stock Voltage with 1:1 270Mhz(G.Skil PC4000 2x1GB)

But bad news is i first tried 2.7Ghz@1.525 and it failed prime in 3 min. I am not calling this chip out yet as this is not a reinstall of XP and i am not sure if running 270Mhz in the Memeroy Controller was not helping.

I will do a complete test this weekend and i hope i can get 2.7Ghz to match my Venice in Single Threaded Performance : /

 

[Mattd46612]

Im sittin at 274 with no problems whatsoever, May flash the bios tommorow and see what I can get to. I think 100mhz short of the venice might equal it in performance. I ditched my 3000 venice for this system. I think you have a good chance of gettin a nice chip, probably get to the 2.6 range on average with these but 2.45 is pretty nice.

 

[Lord Banshee]

OK 2.43GHz 8Hr Prime stable with stock voltage...
My Big Pic

This makes me believe i can get to 2.7 some how some way

if you don't want to look at the picture my stepping is this:
CCBWE 0550XPMW

 

[TankGuys]

Originally posted by: TrevorRC
Responses from ANY Company would be welcome.
MWave, Monarch, ZZF, etc.

Anyone?

I don't know anything about thier steppings, but I've got CCBWE 0550 UPMW's right now...

 

[TrevorRC]

Hoooboy.

Probably going to order one of those.

 

[Smeggy]

I got a CCWE0546MPMW Opty 165 from Newegg about 12 days ago. Currently it's at 2.6 at stock voltage. As soon as I get my new RAM I'm confident I can do 2.7. Good Luck!

 

[jniles]

:disgust:

I have the same chip from newegg (0546mpmw) retail with stock heatpipe type heatsink

I couldnt get board to post at 300

failed prime at 10 minutes at 290 @1.5v core 0

285 for 2 hrs prime but temp was 52c,1.45v

could be my board or me though!!!!!!!!!!!! I will post elsewhere or start my own thread once i get further along

 

[nealh]

Originally posted by: jniles
:disgust:

I have the same chip from newegg (0546mpmw) retail with stock heatpipe type heatsink

I couldnt get board to post at 300

failed prime at 10 minutes at 290 @1.5v core 0

285 for 2 hrs prime but temp was 52c,1.45v

could be my board or me though!!!!!!!!!!!! I will post elsewhere or start my own thread once i get further along

are you trying to run at 1:1 with the memory..that would be 290mhz..if so loosen the memory timings to 3-4-4-8 or use a divider

also crucial ram as I recall is not voltage hungery so it could also be the increased vdimm

 

[brad481]

just got my opteron 165 today - it is CCBWE 0550UPMW - anyone have input on this?

 

[jniles]

[/quote]


are you trying to run at 1:1 with the memory..that would be 290mhz..if so loosen the memory timings to 3-4-4-8 or use a divider

also crucial ram as I recall is not voltage hungery so it could also be the increased vdimm
[/quote]

I followed ZEBO'S quick and dirty guide

set mem to ddr200, then clocked up @stock vcore or auto which my board had at 1.4 ?
at 290 stock vcore failed prime core0 right away, 1.5vcore failed prime after 10 minutes core0 54c

From there i tried the memory got 215@2,2,2,6 stock vdimm2.6v
260 @2.5,3,3,6 stock vdimm2.6v or 275 @2.5,3,3,6 2.9vdimm

so I settled in at 274=2466mhz with 1:1 ram ddr 548(2.5,3,3,6 1t) 3 hrs prime at 52c

 

[PliotronX]

Those 0550's have been doing well. I received a 0551 from ZZF today, have only heard one report and it isn't good (1.55v for 2500MHz).

edit- saw the big thread at XSF, one guy has an 0551 doing 2700 at 1.5, not quite as good as the 0550]s have been doing, but I'll be happy with ~+FX60 performance

 

[AU Tiger]

Originally posted by: brad481
just got my opteron 165 today - it is CCBWE 0550UPMW - anyone have input on this?

I received same from Monarch today. Won't know till next week how it does.

 

[nealh]

anybody know what the 170s from monarch are..stepping wise

AU tiger was that oem or retail?

 

[AU Tiger]

Originally posted by: nealh
AU tiger was that oem or retail?

Retail

 

[Lord Banshee]

Have it at 2.6Ghz now(FX-60 anyone) dual primed for 2.5hr but i plan on primeing for 8 tonight or tomorrow night.

2.7 right now doesn't look possible as i am at 1.5v(cpuz states 1.47) but i will try it at 1.45 and prime again to see if i can keep 2.6 at 1.45v

 

[One43637]

Originally posted by: Smeggy
I got a CCWE0546MPMW Opty 165 from Newegg about 12 days ago. Currently it's at 2.6 at stock voltage. As soon as I get my new RAM I'm confident I can do 2.7. Good Luck!

could you tell me what the significance in steppings are? is it just to identify the batches and the dates they were produced?

 

[Lord Banshee]

Originally posted by: One43637

Originally posted by: Smeggy
I got a CCWE0546MPMW Opty 165 from Newegg about 12 days ago. Currently it's at 2.6 at stock voltage. As soon as I get my new RAM I'm confident I can do 2.7. Good Luck!

could you tell me what the significance in steppings are? is it just to identify the batches and the dates they were produced?

Yep thats it...

some are better than others

 

[Mattd46612]

I may reseat mine tommorow with some new thermal paste, Ill check what it is. I just flashed to ocwbeta2 and seem to be stable at 2.6 on 1.42 volts or so, its shifting 1.40-1.44 on cpu-z. But i didnt do a volt mod and the bios is at 1.40.