anyone know about cutting/splicing 'rope light'?

[zixxer]

http://www.christmaslightsetc.com/produ...uctid=14940&CategoryID=603&CatalogID=1


This says you can cut every 24 inches, some sites have rope that can be cut every 18 inches.

I need 13-15 ~6inch pieces. 24 and 18 are way too big. Anyone know if it's possible to cut it shorter than they say?

 

[zixxer]

^^^^^^^^

 

[NogginBoink]

Yes, it can be done.

If you look inside the rope, you'll see that each section (18 inches, whatever) is several lights in series. Each section is wired together in parallel.

The bundle in the link you provided even includes 'splice connectors' to help you do this.