Anyone have this setup? xp2100, A7N8X & HyperX 3000? i'm soo close to 2.3GHZ!

[MoonPie]

Ok...i've been messing with this setup all day and so far i got it up to 2.25Ghz.

specs : asus a7n8x dlx 2.0
kingston hyperX 3000
coolling sk-7

fsb is at 166 with multi 13.5
set my memory to 6-2-2-2T
vcore at 1.7

temp idle at 36 C

can't bump multi no more
it seem only left to figure out is FSB and Vcore....
your suggestions? or have this setup ?

 

[skyking]

Push that FSB, man!
Is that a DL3TC? I'm guessing so, at that speed. start bumping up the FSB, and see what happens. That ram should be good for 180-190 easy.

 

[MoonPie]

can't push FSB above 170...won't post

btw mine is DUT3C

it's unstable muti is back to 13

 

[ChampionAtTufshop]

try relaxing timings (you never know)
raise vcore and go at it again (FSB)
make sure to lock agp down

 

[MoonPie]

well ... lowered my muti to 12.5 now

was able to up fsb to 180 but no more this memory could handle at 370mhz but its at 360

so far so good as to what i'm able to do

it's at 2.255 Ghz but weird comp recognize as XP2600+

is my temp ok at 38 C idle?

is there any guide to memory synch?

 

[sianof]

I have just about the same setup
Asus A7N8X Deluxe Rev 2
Kingston Hyper X PC3000 512mb Chip
SLK-800 with YS-Tech Adjustable.
XP2100

I set my FSB to 166 and my multipliers to 13 with a vcore of 1.65. Everything set to aggressive and it is STABLE posting as XP2700+ and says is at 2.162 MHZ.
I haven't even tried to see what this thing can do yet.
Any pointers of my next settings? Let me know
oh yeah, and my cpu temp is between 37 and 41 C at Full Load, and my mobo at 30 to 32 C at full load
Thanks
Frank S

 

[gplracer]

Some people are having issues with the hyperx ram not working at its rated speed with nforce2 boards. I have an 8RDA+ with a 1700+ "L" 1.5v chip. It does 215x11=2375 @1.7v stable. Right now my cpu temp is 38C.

 

[sianof]

Hey, does anyone with the a7n8x deluxe know how to change the fsb from more than 133,166,200. can you manually put in something different? or no?
also, how do you go about changing the memory timings
any help appreciated
frank s