Anyone have any luck using the voltage jumpers on theMS-905 slotket?

[Toro 45]

Cel 533 on a Soyo 6BA+IV.The Soyo board only has max voltage of 1.65 with the C2.

I tried using the voltage jumpers on the slotket & wow 1.95 on a setting that should have been 1.75 according to the instructions.

I finally got the slotket to go 1.55 then set the bios voltage to 10% & got 1.7 volts.

It's seems ok at 907mhz. I would like to try higher if someone knows the jumper setting to try?

 

[rigor]

I had the same problem with the intel 810 chipset. 1.70=1.90, 1.65=1.65 , whats the deal?

 

[Toro 45]

Ok,looks like the settings under 1.70 are working properly. Setting the jumpers to 1.65volts, I can then set my bios voltage up to 10% giving me 1.80 volts. Much better!

Toro