Anyone have any luck o/c ing a Celey 400

[MrX]

???i got a celeron 400 and its (of course) 66 fsb and my only options are 100 and 133 fsb when i necrease to either win cant load???help??

 

[Wuming]

i had a C400 and i brought it up to 95 * 6 without any problems. i was not able to boot it at 100 * 6 though. i was oc-ing it with an abit bh6. oh yes, i upped the voltage slightly as well, though i cannot remember by how much.

 

[Supradude]

I had a celeron 400 OC'ed to 600 @ default voltage... no problems, in fact, i'm thinking about putting it back into my lan box to see if i can tweak it higher = )

 

[muscleman]

i have one and i can overclock it only to 450 Mgh without touching at the voltage and all this on an aopen AX6BC

 

[MrX]

i have a pretty crappy mobo FIC CW33 only has jumprs for 66mhz 100 or 133 no voltage or fsb

 

[Skitzer]

Probably need to bump the voltage. I had a 400 running at 600 on my BM6 mainboard a long time ago. I had to run the voltage at 2.2v but was totally stable.

 

[scorch2000]

Yeah, I had a 400 Celeron which hit 500 w/ a golden orb. Ran like a charm. Good luck.

MSI K7T Pro 2-A Motherboard
AMD Duron 800 @ 850
256 mb Micron / Hyundai PC-133 SDRAM
ATI Radeon 64MB DDR (7072 drivers)
SB Live Value
DLink PCI Ethernet Card
Quantum 10GB HD ATA/33
32x Panasonic CD-ROM
Acer 17' 77e Monitor
Altec Lansing 45.1 Speakers
WinME
1 Pet Hamster

 

[KouklatheCat]

I was able to get mine to 450Mhz and that was IT. My MOBO supported 75Mhz FSB (75X6).

 

[nicowju]

Got a 400 Celeron for my sister, O'Ced to 600, completely stable in Win98SE. 2.15V with air cooling

 

[Quickfingerz]

I recently had to work on a Dual 400@600 processor setup.