Anyone have a V5500 running at 89mz agp?

blackhawk

Platinum Member
Feb 1, 2000
2,690
1
81
Would like to swap out my Asus 6800 running 133fsb on a BX mb for my Voodoo 5500 but want to know if anyone has been successful. I much prefer the quality of my V5 display but took it out of my main machine for an ATI AIW.
 

Wik

Platinum Member
Mar 20, 2000
2,284
0
0
It should do it with no problem. One is running in my friends BX mb with a 140 mhz FSB.
 

HappyGamer2

Banned
Jun 12, 2000
1,441
0
0
I am unsure what my agp bus is running at but when I overclock my system I never have a problem. I have a p3 bx motherboard and when I go from 100 up to 133 with a software overclock(unrevised agp bus speed divider) it works fine. my v5 agp is one of the vary first ones made with the first bios version, I never update my cards bios since it runs so stable, best to leave it be I figured
go ask the ? here:

http://pub43.ezboard.com/bx3dfx
 

Soldat

Golden Member
Oct 19, 2000
1,162
0
0
well i much prefer my AiW to my V5 5500 but anyway you should be aware that the v5's are more likely to not run with the higher agp speed then the nvidia cards.....mine never liked 89 mhz but of course it will vary from card to card.
 

JackBurton

Lifer
Jul 18, 2000
15,993
14
81


<< It should do it with no problem. One is running in my friends BX mb with a 140 mhz FSB. >>


Not necessarily. My Voodoo5 5500 doesn't like much over 66MHz AGP. :(
 

blackhawk

Platinum Member
Feb 1, 2000
2,690
1
81
Sounds like I might as well try it. My V5 display is much better than the asus 6800 although they're both fast. Rather keep the V5 as they just dont make them like that anymore!!

Just have to get the W2K drivers now.
 

maap

Member
Dec 23, 2000
96
0
0
I have one, just took it out of my third machine (selling the machine). I had it in a SOYO Sy-6ba+100 (bx) mobo with a P3 700 o/c'd to 960 (7x137mhz). The agp bus was running at 91mhz. Ran it like that for about six months with no problem. It sure is a shame they didn't put ddr on the V5. I'd probably still be using it.

---------------------------------------
TBird 1.4 @ 1.575 (10.5x150)
AYHJA-Y core
vcore@1.87v
Thermalright SK-6 w/AS II
Delta 30cfm 39dba fan
Temps:idle-24c/load-42c
Iwill KK266+R(VIA KT133a)
256meg Mushkin PC133 rev3+@5222
Gainward GF2 PRO/450 @ 230/475
Panasonic PanaSync SL70
Maxstor 60gig DiamondMax+
IBM 40gig 75GXP
Antec PP403X PSU
Win98 SE