Anyone get SpectraView II and a ColorMunki working?

[alkemyst]

I keep getting getting a Calibration device not found in the software.

I only installed SpectraView II and the device, I know that there is an incompatibility with the ColorMunki software.

Thanks

 

[PurdueRy]

I keep getting getting a Calibration device not found in the software.

I only installed SpectraView II and the device, I know that there is an incompatibility with the ColorMunki software.

Thanks

You should not need to install the colormunki software. The spectraview II software comes with all the drivers it needs. Also make sure you are using the latest version of the spectraview II software, you can check for update from the help toolbar.

I use spectraview II w/ a NEC calibrated i1 display 2 so I can't assist directly with the colormunki but NEC says it is supported.

I knew I read something about colormunki the other day. Here you go:

X-Rite ColorMunki color sensor:

If the X-Rite ColorMunki software is installed, it will prevent NEC Display Wall Calibrator from accessing the device even if the main ColorMunki application is not currently running.

If you are using the ColorMunki software prior to version 1.1.0:

NEC Display Wall Calibrator will detect if the ColorMunki software is running and give the option of closing it automatically.
To use the ColorMunki software again after NEC Display Wall Calibrator has closed it, you must run the colormunki.exe application from the Startup menu in Windows.

If you are using the ColorMunki software version 1.1.0 or newer:

You must turn off the ColorMunki Service in the Windows Control Panel > "X-Rite Device Services" to allow NEC Display Wall Calibrator to access the device.
To use the ColorMunki software again you must turn the ColorMunki Service back on.

 

[alkemyst]

thanks but that is right out of the popup that comes with the software.

Like I mentioned, I did not install the colormunki software at all.

 

[PurdueRy]

thanks but that is right out of the popup that comes with the software.

Like I mentioned, I did not install the colormunki software at all.

When you "installed the device" did you install the device off their CD or drivers or did you direct it to the drivers installed by spectraview II?

 

[alkemyst]

spectraview...but since then I have tried both ways as well with the latest colormunki drivers.