Antec SX 1040

[ROJAS]

My case light led is doesn't light up. Which wire name is the one that controls the light to the case. Is it the atx p.s. plug? I guess I had a brainfart. Tried a couple and no luck. My led to hard drive is working and the rest are okay just Power indicator green is out.

Any suggestion...

 

[glowninja]

Usually the led cords connect from the case to the mobo. If I'm reading this correctly, the power led on the front of the case is out, right? I'd follow that cord back and see if its disconnected from the motherboard. There's a row of pins on the mb it should plug onto.

 

[ROJAS]

Power LED wire. I will look for that one.

Thank you very much.

 

[nnnyyy]

Its all bunched up with the PowerSwitch, ResetSwitch, PowerLED, HDDLED, Speaker. Should be coming from the front of the case (bottom)

 

[Garet Jax]

ROJAS,

If you find the Power LED wire is hooked up but the light is not working, then you might try turning the female connector around and reconnecting it.