Another question

[Freeze]

How do I get it so that I can recieve stats through the TA page, instead of waiting for Dnet?

 

[Engineer]

Freeze,

You need to change you keyserver to the team pproxy: proxy.teamanandtech.com ...This will allow all blocks to be flushed through Mika's before going on to D.net...Therefore...STATS!!!🙂

A quick way of doing this is to Edit your dnetc.ini file and make sure that under [networking] reads this way...

[networking]
keyserver=proxy.teamanandtech.com:2064
nofallback=true
autofindkeyserver=no

Restart your client....

Good Luck!

 

[sciencewhiz]

You need to change the keyserver that the client uses. to do go to the configuration screen and select and do the following:

Option 2 -> Option 6 -> Set option 3 to proxy.teamanadtech.com

then go to Team Anandtech pproxy signup to sign up for the interactive stats

Your stats will then begin showing up here.

Unless you are a do 5000 blocks a week, you will need to check page 2 and three also.

Edit: It looks like engineer can type faster than I can🙁. Also, at the pproxy signup there are better instuctions than my hurridly(sp?) typed instructions

 

[JonB]

Stats Stats Stats

The stats that TA keeps are provided by fellow teammember Mika (and his server which was assembled from team donated funds).

The server displays lots of stats, but only for those members who send and receive their DNet work through that server.

Here is how to Join

Here is the weekly RC5 team stats

Here is how to literally put yourself on the Map

try these, ask more questions as needed.

 

[Freeze]

I figured out how to do the map thing earlier 🙂. I must have missed the PProxy link... Oh well. Thanks for the info. Almost at 10K in just 20 days. hehe.

 

[Ken g6]

I've considered signing up for the interactive stats before, but whenever I try to access the interactive stats page, I get a 404. 🙁 So I figured it wasn't worth it to send the form. Is this the right address?

 

[ViRGE]

Ken, your link is wrong, but the real interactive stats are down anyways, so don't bother.🙁

 

[Russ]

Ken_g6,

Drop "anandtech" off the end.

Russ, NCNE