My duron 600 now runs at 1016 where it used to max out at 963. Not really much of a gain except in my mind though, it is pretty cool to have a $60 1ghz processor. The loctite rear window defogger repair kit was the clincher. I used 1 fairly firm hair from a paintbrush (a limp one won't work) to apply it with no worries about scratching anything important. Here's to no more re-penciling those suckers!
As a note I did not wait 24 hours for it to cure, only about 1 hour. I figured that since the paint is so thin, and the current is so little (compared to 12v at 20 amps for a defogger)that it would be ok, and it is.
for anyone who's keeping track, my duron is a week 27. It is currently running at 37C, 1.85v, 9.5*107, fop38 w a/s, a7v.
As a note I did not wait 24 hours for it to cure, only about 1 hour. I figured that since the paint is so thin, and the current is so little (compared to 12v at 20 amps for a defogger)that it would be ok, and it is.
for anyone who's keeping track, my duron is a week 27. It is currently running at 37C, 1.85v, 9.5*107, fop38 w a/s, a7v.
I might upgrade to one of these Durons sooner rather than later....:
Facebook
Twitter