AMI Quick Flash Help - Solved thanks again :)

[Wellcky]

okay here's what I did...

Quick Flash Instructions For AMI Motherboards:
(FLASH UTILILTY NOT REQUIRED)

· Unzip file, copy the "ROM" file to a diskette in "A" drive.
(Diskette does not have to be bootable).

· Make sure your using the on board floppy controller.

· With system powered off and diskette with "ROM" file in "A" drive.

· Hold down on the "CTRL & HOME" keys and then power on system.

· There will be no video and notice floppy drive being accessed.

· You should hear 1 beep let go of keys.

· Then you will hear 2 beeps and then 3 beeps.

· System should reset and notice new BIOS release date at top of screen.

· Enter BIOS SETUP run the OPTIMAL SETINGS OPTION.

· Change BIOS SETTINGS for your configuration.

but the only problem is that is just keeps beeping twice never hits the third beep sequence any clues??

been beeping for about a half hour

 

[Barefoot]

Hmm....only thought in my mind, if that even counts...is it the correct BIOS version? If so, then I have no idea what to tell you. Just make sure you're trying to flash it with the correct ROM.

 

[Wellcky]

thanks for the help, got it working now I jsut flash it again then rebooted after 5mins of 2beeps sequences and it seemed to work