Before you do that just look at block and visualize the placement of the IO die and the chiplet and see if your current setup is optimal . Maybe just swapping the in and out or rotation of the block, if possible, may help lower your temps somewhat.
Before you do that just look at block and visualize the placement of the IO die and the chiplet and see if your current setup is optimal . Maybe just swapping the in and out or rotation of the block, if possible, may help lower your temps somewhat.
sdifox
No Lifer
- Sep 30, 2005
- 100,883
- 18,082
- 126
Just built my first desktop (for me) since Opteron 165 in 2006 xd
3700X
Aorus Ultra
16GB Ballistix 3600
Asus RX 5700 XT
Adata 1TB SX8200 Pro nvme
Corsair RM 850x
Reused the Ultra Red Dragon case ftom Opteron lol
Currently hooked up to Vizio P-65f1 until I decide what to do with display.
3700X
Aorus Ultra
16GB Ballistix 3600
Asus RX 5700 XT
Adata 1TB SX8200 Pro nvme
Corsair RM 850x
Reused the Ultra Red Dragon case ftom Opteron lol
Currently hooked up to Vizio P-65f1 until I decide what to do with display.
Last edited:
fleshconsumed
Diamond Member
- Feb 21, 2002
- 6,486
- 2,363
- 136
sdifox
No Lifer
- Sep 30, 2005
- 100,883
- 18,082
- 126
Makaveli
Diamond Member
- Feb 8, 2002
- 5,000
- 1,589
- 136
wow I haven't seen a Chenming Case in about 10 years.
I had a grey one back in the day was sad to retire her when I did because it housed so many of my builds.
Last edited:
Slappy00
Golden Member
- Jun 17, 2002
- 1,820
- 4
- 81
sdifox
No Lifer
- Sep 30, 2005
- 100,883
- 18,082
- 126
Markfw
Moderator Emeritus, Elite Member
- May 16, 2002
- 27,361
- 16,194
- 136
I have one of those but its aluminum ! And I have a grey steel one also
Hans Gruber
Platinum Member
- Dec 23, 2006
- 2,535
- 1,363
- 136
Obligatory I had that case, too. In black and blue. Bought it in 1996, I think. Strong enough to stand on.
My build is ready, well, almost I have to add 32GB, XMP is enabled now.
Performs as expected, temp is about 65°C in Cinebench R20 (with silent cables)
and obviously I'm waiting to decide on a new GPU (but since the valve index can't be ordered I'm not in a hurry to order the 2080 super anyway.)
The big front fans are a bit too much now, I will see if I can move them to the motherboard so I can control the speed.
(edit: the front fan speed is fixed, that's like a design flow for these cases)
The noise sensor isn't very usefull it jumps much up and down without me hearing a difference. The 2 extra temp sensors are nice, I did put one on the front intake just to check. (22°C)
Pixinsight Benchmark
pixinsight.com
Performs as expected, temp is about 65°C in Cinebench R20 (with silent cables)
and obviously I'm waiting to decide on a new GPU (but since the valve index can't be ordered I'm not in a hurry to order the 2080 super anyway.)
The big front fans are a bit too much now, I will see if I can move them to the motherboard so I can control the speed.
(edit: the front fan speed is fixed, that's like a design flow for these cases)
The noise sensor isn't very usefull it jumps much up and down without me hearing a difference. The 2 extra temp sensors are nice, I did put one on the front intake just to check. (22°C)
Pixinsight Benchmark
PixInsight — PixInsight Benchmark
Attachments
Last edited:
Replacement mobo is in. Hopefully I don’t have problems. If i do, the only untested component will be the CPU. Fingers crossed.
fleshconsumed
Diamond Member
- Feb 21, 2002
- 6,486
- 2,363
- 136
How fast are your heatsink fans spinning to maintain 65 degrees?My build is ready, well, almost I have to add 32GB, XMP is enabled now.
Performs as expected, temp is about 65°C in Cinebench R20 (with silent cables)
and obviously I'm waiting to decide on a new GPU (but since the valve index can't be ordered I'm not in a hurry to order the 2080 super anyway.)
The big front fans are a bit too much now, I will see if I can move them to the motherboard so I can control the speed.
The noise sensor isn't very usefull it jumps much up and down without me hearing a difference. The 2 extra temp sensors are nice, I did put one on the front intake just to check. (22°C)
Pixinsight Benchmark
PixInsight — PixInsight Benchmark
max: speed of around 1700RPM with the silence cables
I also added the extra 32GB, latency is about 2ns slower now. (4x16GB)
The A0 code is about IDE init that isn't complete but there are no (SATA) connections at the moment only one m.2 SSD, I assume it will go away when an extra harddrive is connected.
It doesn't stay in XMP mode with 4 DIMMS, so I will try the DRAM calculation tool to see if that helps.
Attachments
Last edited:
Beta 3.78 Bios for Asrock X470 Taichi is out. Best yet.
sdifox
No Lifer
- Sep 30, 2005
- 100,883
- 18,082
- 126
Fanatical Meat
Lifer
- Feb 4, 2009
- 35,862
- 17,406
- 136
Anything with a 3xxx is going to have better memory support. I’d go for a 3600.
mohit9206
Golden Member
- Jul 2, 2013
- 1,381
- 511
- 136
Its available in a few countries officially in stores, slightly cheaper than 2600.
VirtualLarry
No Lifer
- Aug 25, 2001
- 56,587
- 10,225
- 126
Considering that the 2600 and 2600X have both been available (and mostly, still are?) for $119.99 here in the USA, $120 for a 3500 non--X would seem like a real bargain to me, honestly, if I were building a gaming rig on a tight budget.
sdifox
No Lifer
- Sep 30, 2005
- 100,883
- 18,082
- 126
VirtualLarry
No Lifer
- Aug 25, 2001
- 56,587
- 10,225
- 126
3500X is available retail-boxed from Chinese importers for $154.99 on ebay. If you wanted to take a risk...
How goes the adventure? I doubt I'm the only one wondering how your builds going.
TRENDING THREADS
-
Discussion Zen 5 Speculation (EPYC Turin and Strix Point/Granite Ridge - Ryzen 9000)- Started by DisEnchantment
- Replies: 25K
-
Discussion Intel Meteor, Arrow, Lunar & Panther Lakes + WCL Discussion Threads
- Started by Tigerick
- Replies: 23K
-
Discussion Intel current and future Lakes & Rapids thread- Started by TheF34RChannel
- Replies: 23K
-
-
Facebook
Twitter