AMD 64 X2 4200+ stock speed settings

[bgc99]

Are these the proper settings to run an X2 4200+ at stock speed? Mobo is Asus A8N-Sli Premium.

CPU Speed shows 2200MHZ.
Hyper Transport Frequency : Auto

CPU Frequency: 200.0
PCI Express Clock: 100MHZ
DDR Voltage: 2.70V
Chipset Voltage: +1.5V
HT Voltage: +1.20V
CPU Multiplier: Auto
CPU Voltage: 1.350V
PCI Clock Synchronization Mode: 33.33MHZ

All of these are the settings that were listed when everything was set to AUTO except the DDR Voltage. I had to set the Overclock Profile to manual in order to increase the DDR Voltage, but I left the rest of the settings alone.


Thanks,
BGC

 

[TheStu]

Well, generally speaking, if you drop the chip in the mobo, and don't mess with anything, you will run at stock speed. So, yes, those would be the right settings

 

[dguy6789]

Those settings do look correct.

 

[bgc99]

if you drop the chip in the mobo, and don't mess with anything, you will run at stock speed

Just wanted to be sure. The last build I did was several years ago and you had to set all CPU parameters manually.

Thanks,
BGC