I just built my comp and ran cpuz and it shows my cpu at 1 Ghz! it rcognises it as a 3200+ socket 939 but says its only 1 GHZ! i didnt mess with any bios settings and Call of duty runs like crap paired with a 6800gt! on 3dmark03 i only got a 9000 and on the cpu test it was running at 5-10 fps! help please!
AMD 64 3200+ running at 1GHz!
- Thread starter Wardog2121
- Start date
Do you have Cool n Quiet on in the BIOS? I would look over the BIOS settings to make sure everything is okay.
no its not enabled and everything look fine it bios but when i get to my desktop it runs pretty slow and games are horrible
My first inclination would be to clear the cmos. When you boot go to bios and set to most stable mode.
See what happens then. Almost sounds like you have the FSB set to 100mhz. But just guessing.
See what happens then. Almost sounds like you have the FSB set to 100mhz. But just guessing.
go into the bios, under the overclocking settings in the bios, and make sure the the cpu multiplier is at 10.
Exactly what I was going to say. The 3200 has a 10X multiplier and the FSB100 makes perfect sense. If you find that it is set @ 100, bump it up to 200 and you should be fine. Alternatively, it could be a FSB 200 with a 5X multiplier.
That 3dmark score is not really THAT low and you can see that it is not a VGA problem. The "low" 3dmark score is due to the scores that your CPU gives when determining the overall 3d score.
actually that not a bad 3dmark score for having a 1ghz proc. that cpu test always scores 5-10fps. im not exaclty sure what it does in that test. I think its placing the bulk of the rendering on the cpu.
TRENDING THREADS
-
Discussion Zen 5 Speculation (EPYC Turin and Strix Point/Granite Ridge - Ryzen 9000)- Started by DisEnchantment
- Replies: 25K
-
Discussion Intel Meteor, Arrow, Lunar & Panther Lakes + WCL Discussion Threads
- Started by Tigerick
- Replies: 23K
-
Discussion Intel current and future Lakes & Rapids thread- Started by TheF34RChannel
- Replies: 23K
-
-
Facebook
Twitter