AIUHB 0317 2000+

[Dravic]

Does anyone have an experience with axda2000 DUT3C aiuhb 0317 2000+ cpu's?

The only mention of them out in the "wild" is a post on athlonmb forums that seem to belive that they will hit 2300mhz pretty easily.

any info would be greatly appreciated.

Peace,

 

[Dravic]

nobody.. well i'll let ya know how it goes anyway

 

[infinite012]

we'll be waiting for your results

 

[Dravic]

FYI
axda2000 DUT3C aiuhb 0317 2000+

2258mhz 12.5x180 @1.7v
PNY pc3500 at 2225(I get better mem scores using spd timings though)
Thin pny's pc3500 is actually samsung mem

tried lowering the mutli but things get a little flaky on the msi kt3 above 187

If the msi kt3 gave me voltage options above 1.7 with the dut3c it would easly pass 2.3ghz
it will boot into windows at 2.27-2.3ghz+ but wont complete 3dmark.

might just have to find a voltage mod for this board.. so i can at least run at 185fsb

3dmark 12011 ti4200(266/567)
sandra
cpu arth 6217/3091
cpu multi 12306/14229
mem 2399/2255(kt333 holding me back)

 

[touchmyichi]

not too shabby.

 

[lookouthere]

not too bad

 

[lookouthere]

using nForce 2 boards might give you a boost

 

[Ymeister19]

yeah i wenyt from via kt400 (a7v8x) and a 2000+ xp tbred rev A @ 167/11, to an nforce2 abit NF7-S and now im @ 200/9.5 took the fsb that much further on a rev A. Also had to give it 2.03 to get stable on the a7v8x, but it does 200X9.5 at 1.8v now

 

[bgeh]

hmm, never seen the AIUHB's in a long time. update us on how it goes🙂

 

[Dravic]

used the wire mod from here Wire mod thread to get 1.85 volts on this MSI kt3

at 2.32gz stable now at 1.85 volts(reading 1.82 volts actual)