AIUHB 0301 Chip XP2100????Anyone have it?

[sianof]

Anyone have this XP 2100 T-BRED-B AIUHB 0301??? Just Wondering if it is a decent overclocker or not???
Or How about the XP 1700 T-BRED-B JIUHB 0309 ??
Let me Know !!!
Frank S

 

[woodie1]

I have the 2100+. Can't tell you much yet on its OC ability.

 

[Shimmishim]

Originally posted by: sianof
Anyone have this XP 2100 T-BRED-B AIUHB 0301??? Just Wondering if it is a decent overclocker or not???
Or How about the XP 1700 T-BRED-B JIUHB 0309 ??
Let me Know !!!
Frank S

i had a 0301 2100+ back in january

it wasn't all that great...

but some people are getting GREAT overclocks on it

 

[hans007]

i have a 2100+ auihb 0301.



running on a msi k7n2g @ 2167 with 1.75 volts (actual 1.79). it crashes prime after about an hour with 1.7 (actual 1.74) and id idnt bother with 1725., good o/c and ibought it for $70 in fs/ft so cheap too.


sure some of the week 10 1700s are doing better, but this is asure thing. my fan is a dynatron retail fan (copper base version, but skivved aluminum top, just like the retail but with copper). not too loud not too quiet, 300 watt antec. and thats it. i have no cards and am using onboard video sound and lan currently.

ram is pc2700 infineon -6 @ spd cas2.5

 

[Hottie]

I have 2100+ 0301 w/ SLK 800, I can manage to get it around 2.2 stable. anything higher will boot but not stable.

 

[MrEgo]

0301 @ 200mhz fsb and 2300mhz w/ 1.75V. it hits 2500MHz at 1.875V, but I don't feel comfortable that high.

 

[LastRide]

The 0301 2100+ I had did 2.4Ghz on 1.8V.It was a brown chip too.

 

[human2k]

I have an 0302, does that count?

 

[SpideyCU]

I have a 0301, haven't pushed it as far some other people here yet because I want to put some AS3 on my NB heatsink before proceeding. The speeds people have been getting here are nice, can't wait to try and get it up there myself.

 

[maluckey]

301 AIUHB at 1962 mhz at 157FSB for two weeks, no sweat, no crashes. Not as high as most, because I have a bad audio card that dies at around 160mhz FSB (no 1/5 divider on a KT266a).

 

[amcdonald]

I just received a 2100+ B from newegg.
Stepping: AXDA2100DUT3C AIUHB0301MPM
I'll post results soon

 

[Ginsu543]

I currently have my 2100+ AIUHB 0301 rock solid (Prime95 for over an hour without error) at 2.22 GHz (12 x 185 MHz) on my Abit NF7-S mobo revision 1.0. Others I know have gotten it upto 2.3 GHz. The AIUHB is the best overclocker for 2100+. But I believe that the 1700+ JIUHB is an even better overclocker. I know of couple of guys who got theirs to overclock to 2.4 GHz!!! Not bad for a chip under $70.

 

[amcdonald]

I just set up my new 2100+ 0301 on a temp testbed.
booted to 13x166 at default voltages.
not getting picky yet so its not fine tuned, but I just ran through sisoft's burnin at 2323 (12.5x185.8) vcore 1.75 (reported from bios) 2,2,2,5 2.77 vcore. 8rda+
This is already way better than my last chip, an 0302.

 

[hans007]

i dont know if my board just sucks... msi k7n2g-l .


but i can get 166 bus x 12.5 = 2133 xp2700+

1.725 volts was stable in prime95. using a copper base $12 dynatron cooler.

i am selling this chip later this week btw for around $70

 

[maluckey]

Update! I'm at 2275mhz (175 x 13) at 1.65v and 39 C.! All air cooled. Ran stable for twelve hour loop demo of UT2k3, and then, four hours of Unreal Tournament 2003, online gaming. This is a brown chip AIUHB too!