• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Air Flow - Fan configurations

T

tranceport

Diamond Member
Inside of you case, Is it better to have Positive Pressure, Negative Pressure, or Equal air flow.

If you had 3 fans in the back and 3 fans in the front of your case. Would you have all 6 turning at the same speeds with 3 intake and 3 exhaust? What would be your configuration of this situation.
 
You are gonna get a hundred different interpretations of what is best for you, if you have time/money/effort just try all three scenarios and see what yields the best temps.
 
amcdonald is right. you will always wonder if the grass is greener on the other side, so try them all.
the idea in the end will ultimately be to move air through the cpu heatsink as fast as possible.
 
supposably, "negative preassure" is better for cooling, for example think about preassure cookers. posative preassure is better for dust etc, because the only air going into the case goes through the intake fans, where you can filter it, whereas "negative preassure" will have to drag the extra air in somewhere and that means all the little holes like around cdrom drives. equal preassure means a bit less of both posative/negative. In short make it roughly equal and only the most anal have anything to worry about.
 
I had felt that equal would be the way to go. I can generate about 270cfm exhaust in the back and about 250 intake in the front. I can then taper the exhaust down a bit with my rheobus. I could also play around a with negative and postive pressure. 3 80mm tornado's in the front. 2 80mm tornado's in the back and a 92mm tornado in the back.

back = 84.1 + 84.1 + 119 = 287.2
front = 84.1 + 84.1 + 84.1 = 252.3

I suppose that is a bit much in air movement. I am just gonna run most of them at 7v and see how much heat I can generate with my rheobus 🙂.

I dunno mostly brainstorming to try and find ways to spend money......
 
Originally posted by: tranceport
find ways to spend money......
Click to expand...

I have PayPal... 😉

I also have to agree you should probably try all three setups and see what works bes tfor you. Maybe try with 2 and 2? I would think all those fans would get loud, though I like white noise and don't mind my total 8 case fans (9 if I switch the extra exhaust on) and 2 PSUs with 2 fans each. (Two cases)

\Dan
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top