• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Ah Crap, someone please help me!

M

Matt2

Diamond Member
Ok, I just built an entirely new Athlon XP 1900+ system with an MSI KT3 Ultra 2 mobo.

Here's the problem. Iw as messing around in the BIOS and changed the CPU multiplier to 14.0x and forgot to change it back. I rebooted the computer and it didnt post. No video signal or anything. Now whatever I do the computer will not post. I took out the CPU and booted it without a CPU to see if that helped but it didn't. How do I reset the BIOS settings? Or did I fry my computer?

thanks, matt
 
first you need the cpu or ya get nothing

will it post with just the cpu, ra, vidcard in it?

post the system specs.
 
Do you have the mb manual? if you do, it should tell you how to reset the bios.
On my Soyo i half to disconect the power source from the mb then short the jumper for like five seconds then put the jumper back conect the power source and boot up.
good luck.
 
Yeah I would imagine that all you have to do is reset the CMOS on your mb, usually by a jumper. This sounds like the case and would be the first thing I would do.

-VTrider
 
Thanks a lot guys. I actually solved it before I saw your replies, but still, thanks anyways. I was lookin around on the mobo layout and I found the clear CMOS jumper.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top