agp bus: how to "lower" it

[mikelou26]

aiight i oced my comp to fsb 133 now
from 100 mhz fsb

so my 66 agp bus on my video card is like 125 agp bus now..
so how do i lower it (agp bus)?

 

[lundog22]

Sound like you are using the BX boards.

Anyway I don't think you can lower the agp slot.
But your Geforce 2 Ultra can do 4x agp.
So you should't have a problem.

 

[mikelou26]

sorry man i am using via chip set my motherb is asus psv133 and only can go 2 x =( GRR*

 

[AndyHui]

mikelou26: I explained in your last post asking this question that the AGP speed will drop back down to 66MHz when you use the 133MHz FSB. The BIOS automatically makes the switch.

In any case, if you have managed to get your system up at 133, the AGP would be operating at 89MHz which the GeForce is perfectly capable of handling. If you managed to get it up to 140MHz, it would be only 92MHz.

Unless you managed to get your system running at 187.5MHz FSB along with 125MHz AGP (which I highly doubt.....your P3V133 doesn't even HAVE that setting), you wouldn't even be able to boot.

 

[mikelou26]

oh aiights
thanks
hehe
sorry
yo

hmm
i just got my comp to 933 mhz from 700 mhz..
=T

my motherboard is a asus via p3v133 as u know.. which it sucks..need jumpers to change the fsb..
is ther any other way

like if i get a new motherboard..
=T
will i able to push it over 1ghz?

i think i could..
=D
any suggestions?

and um..
for intel...
the only way u can o/c a comp is change the FSB ra?
cuz the cpu core
the bus frequency mulitiple
is on permeant setting ra?

and..

my pci frequenct multiple..
selection...

i have four setting options on my mother board...
one is 1/2x
and 1/3x
and 1/4 x
and the last one is "reserved" wut does it mean?

thanks manz for helping me
=D
another thing
to o/c the right way
do i need to change the voltage regulator output setting?
u know vcore?

i changed it now from normal to test now..