AGP 4x card on APG 2x slot

[MadEye2]

Just been reading through the graphics card FAQ on here and it says that AGP4x cards usually work on 2x. I have a spare Siluro GF4 ti4200 card (not the 8x enhanced version) and a second PC with this chipset according to CPU-Z:

Mainboard and chipset
Motherboard manufacturer Compaq
Motherboard model 041Ch,
BIOS vendor Compaq
BIOS revision 686T2
BIOS release date 08/18/99
Chipset Intel i440BX/ZX rev. C1
Southbridge Intel 82371 (PIIX4) rev. 2

Unfortunately I can't find any information about this motherboard, and I'm not allowed to tinker with the second PC until I get all the facts - it's my step-dad's. So can anyone confirm that this card will work on this machine?

Thanks.

 

[MadEye2]

If it does work what kind of performance will I get with it? The downstairs PC is a P3 running at 650Mhz with a Millennium G400 AGP card.

 

[VIAN]

AGP 4x cards should be able to run in AGP 2x cards, just stick it in and see if it fits.

AGP 4x cards are labelled AGP 4x/2x

 

[MadEye2]

Alright, thanks. If it does fit it will work won't it? I won't have to worry about the voltage and all that?
I have to ask because I can't find any information about this mobo whatsoever, and I can't open it up to see the model number written on the board until I've found some information. Bit of a catch 22.

 

[DAPUNISHER]

No worries, it will work fine I had that exact card and as stated above it supports the 2x and 4x spec. I don't know how much, if any 2x will hold it back, and the CPU is likely to be a bigger bottleneck for games?

 

[MadEye2]

Excellent, thank you. I'm going to sneak the card in tommorrow, when no ones about. Hopefully they won't notice.