Look above again, I said it's this way with premium cable only. With basic cable the TV's own native/internal tuner is used. That's the way I normally watch TV, with the digital* box bypassed (*as it's called here, but not an accurate description), because with the box turned off, bypassed, is the only way to watch one channel while recording another. If I want to watch something on any of the movie channels or premium channels I turn the box back on and that's when the TV's tuner is on 3, or the video input is used. I covered that above. 😉Originally posted by: PurdueRy
Originally posted by: computer
The tuner that comes in a TV is a native tuner. For decades, they have had to be tuned to ch. 3 or 4 and your cable box was used through that channel and this is how you watched premium cable. So what kind of tuner, how many channels, and PIP is all useless and irrelevant if one always uses the cable box. All the TV needed was ch. 3 or 4 (or some kind of video input) to watch your cable TV premium channels through the cable box. As you are aware, I, anyone I would assume, have to bypass the box through which you watch premium cable in order to record one basic cable program while watching another basic cable program. This is when the TV's native tuner is used. I'm trying to ascertain if this will remain unchanged.
The only reason you are tuned to channel three is because that is how your TV accepts input over the RF input. This is a very poor connection resulting in very poor video quality. Really you aren't really using much of your "native" tuner right now at all! All it is using that as is a video input. The same thing would be accomplished if you connected your cable box via any other video connection. Now, if you are tuning via your TV to access the cable channels without a remote then that is a bit different.
Well as for as portable TV I do, but as for the rest I hope not. 😕As for the rest of the response. Smile, you now know you don't have anything to worry about 🙂.