Adding front panel UBS 3.0 in external bay

[JJ24]

2 port USB3.0 Front Panel
http://www.newegg.com/Product/Produc...82E16811999246
Will this (or a similar one) front panel add-on for USB 3.0 work with the following:

Motherboard:
ASRock Z77 Pro3
http://www.newegg.com/Product/Produc...82E16813157297

*** My main concern is that the add-on says it has a 20 pin connector, while the Motherboard connecter on the Pro3 looks like a 19 pin ***

 

[JJ24]

Further googling seems that the cables always have "20" pin connector but 1 is just a "key" and doesn't matter... So assuming that's correct, I'd say that a Mod can lock/delete this thread at their own discretion. Sorry for the dumb question

 

[Eureka]

Just make sure you get the right one... that one fits into a floppy bay, if you only have full ODD drive bays (5.25") you'll either need to use an adaptor or get a different panel.