I slapped a tbird 1.4(266mhz bus)on a FIC AD-11 and covered it with a volcano-2 hsf and a bit of thermal paste. Filled the DIMM sockets with Crucial PC2100 CL2.5 DDR 256MB + 256MB. Throw in an original Geforce (Elsa Erazor X) in the AGP slot and it POSTs fine. I hooked up the Adaptec SCSI card to Segate Hawk 4.5 gb drive and Plextor 32Wide to install OS and it still POSTs fine.
I can't get Win2000, 98, ME, Linux or anything to install. I get "can't load \i386\ntkrnlmp.exe. The error code is 4". Tried 2 different DDR modules, 3 vid cards, 2 scsi cards, disable "everything" etc. Same result.
After countless hours of web searches and hardware substitutions, I can get the system to function by swapping my chip for a friends Duron 600(6*100). The 1.4 also works fine in the other system (but only at 1050(10.5*100) tht board doesn't do 133(266)mhz bus. Suprise! it works fine in my rig at 1050 as well. I have no access to another DDR rig to test the ram or 133mhz board to test the chip at full speed either. Any suggestions?
TIA
Dan
I can't get Win2000, 98, ME, Linux or anything to install. I get "can't load \i386\ntkrnlmp.exe. The error code is 4". Tried 2 different DDR modules, 3 vid cards, 2 scsi cards, disable "everything" etc. Same result.
After countless hours of web searches and hardware substitutions, I can get the system to function by swapping my chip for a friends Duron 600(6*100). The 1.4 also works fine in the other system (but only at 1050(10.5*100) tht board doesn't do 133(266)mhz bus. Suprise! it works fine in my rig at 1050 as well. I have no access to another DDR rig to test the ram or 133mhz board to test the chip at full speed either. Any suggestions?
TIA
Dan
Facebook
Twitter