These WPCREDIT settings should work best for VT6X4 owners. Note: Use WPCRSET to set the registers in the following order:
No. Register|Data
1...50|FF
2...51|FF
3...68|40 (for 66 Mhz PCI)
4...64|12
5...65|12
6...66|12
7...67|12
Set register 68 first before setting memory interleave (registers 64-66, 67 is redundant cuz 3 dimm slots). These settings work for CAS 2 SDRAM, with Bank Timing set to TURBO in BIOS. CAS 3 SDRAM will have different settings for registers 64-67, so be cautious and know your RAM.
No. Register|Data
1...50|FF
2...51|FF
3...68|40 (for 66 Mhz PCI)
4...64|12
5...65|12
6...66|12
7...67|12
Set register 68 first before setting memory interleave (registers 64-66, 67 is redundant cuz 3 dimm slots). These settings work for CAS 2 SDRAM, with Bank Timing set to TURBO in BIOS. CAS 3 SDRAM will have different settings for registers 64-67, so be cautious and know your RAM.
Facebook
Twitter