Okay, here's the deal:
I've been tinkering with this VP6 ever since I've installed it. Upon the first installation, nothing worked. I hear the computer boot up, but my monitor shows no video. Nothing has been overclocked. I've been tinkering with my computer to try to make it work. Any suggestions?
Here's the setup:
2x PIII 1.0 Ghz Processors 133bus (socket 370)
2x Golden Orbs with artic silver II
Abit VP6 motherboard
Voodoo3 3500TV (even tried putting in an AGP Geforce2 MX 23MB)
Adaptec 2940 U2W SCSI controller card
Sound Blaster Live Value
3Com NIC
Generic Modem
Plextor 8x20 CDR Drive
Yamaha 4x4x16 CDRW Drive
Pioneer 303s DVD Drive
Seagate Cheetah 9.1 GB SCSI Hard Drive
Seagate Cheetah 18 GB SCSI Hard Drive
Any suggestions as to why I can't even get a boot screen? I can't even see the Bios Screen if I wanted to.
I've tried taking out all the PCI slots and leaving the video card in, but nothing appears on the monitor still.
Any help would be appreciated, thanks!
I've been tinkering with this VP6 ever since I've installed it. Upon the first installation, nothing worked. I hear the computer boot up, but my monitor shows no video. Nothing has been overclocked. I've been tinkering with my computer to try to make it work. Any suggestions?
Here's the setup:
2x PIII 1.0 Ghz Processors 133bus (socket 370)
2x Golden Orbs with artic silver II
Abit VP6 motherboard
Voodoo3 3500TV (even tried putting in an AGP Geforce2 MX 23MB)
Adaptec 2940 U2W SCSI controller card
Sound Blaster Live Value
3Com NIC
Generic Modem
Plextor 8x20 CDR Drive
Yamaha 4x4x16 CDRW Drive
Pioneer 303s DVD Drive
Seagate Cheetah 9.1 GB SCSI Hard Drive
Seagate Cheetah 18 GB SCSI Hard Drive
Any suggestions as to why I can't even get a boot screen? I can't even see the Bios Screen if I wanted to.
I've tried taking out all the PCI slots and leaving the video card in, but nothing appears on the monitor still.
Any help would be appreciated, thanks!
Facebook
Twitter