Abit KT7A Overclocking Problems :[

[controler]

I just got this board. I have a Athlon 1Ghz. Board runs find a 10 x 100. I set the board to boot at 7.5 x 133, it boots at 7 x 133... why? Anything else will not POST. I tried manually setting 7.5 x 133, 8.0 x 133, 7.0 x 140. I get nothing. My cpu is unlocked by the pencil trick, and I am pretty confident the L1's are connected.

Any help would be appreciated.

 

[alarcon]

try to unlock again

 

[Whizzy]

Hi,

I had the same problems, same mobo but with a Duron 700
The solution: It is the pencil trick !! really i had to do mine about 8 times before it was right !

use a soft pencil : i used a 3B pencil....

Good luck !!
I'm currently at 7.5x133 = 1000Mhz and it feels good although not 100% stable...

 

[Losty]

i did it 4 times!