• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Abit KT7-RAID Temp Probe

R

RWise

Member
In the BIOS my CPU Temp is displayed as 0 degrees Celsius. Does this mean that the built in temperature probe under the CPU is faulty or is it a problem with the BIOS reading the probe incorrectly.
 
Well, unless your 'Super-Cooling' there's a problem with the sensor. Have you tried to obvious checks?

1) Pull the CPU and make sure that the leads of the sensor aren't touching anything metalic.

2) Is there any contaimination between the leads which might be shorting it?

3) You would have had to bend the sensor slightly to mount the CPU...you didn't break or crack the leads did you?

4) Check the BACK SIDE of the motherboard. The sensor leads stick out farther than the rest of the circuitry does, perhaps its shorted on the back side? (I clipped mine flush with the board).

Hope this helps,

Ray

 
You must log in or register to reply here.

TRENDING THREADS

Back
Top