ABIT KT&/ RAID-how to set memory clock speed? is this correct?

[JustStarting]

have an abit kt7-raid. how do i set the bios to get memory running at 133 (256mb/pc133/7.5ns/cas2/micron). im not sure this is correct but do i set the dram clock to host+pciclock? if i just set it at host will it only run at 100mhz? how far can i take the fsb on this w/ duron 700 and the following:

abit kt7/raid
duron 700(had it to 950@ 1.8v, waiting for my taisol to keep it there)
30gb quantum ultra66/7200
256mb/pc133/cas2/7.5ns/micron memory
sblive!value- (works w/sb16 emulation disabled)
geforce 32mb annihilator agp
52x cdrom
generic floppy

thanks in advance

 

[clockhar]

I don't have an abit motherboard but most motherboards work the same. You are right, to get your memory running at 133 mhz, just set it to host + pci clock (100+33 mhz = 133 mhz). You can push your fsb up as much as your processor/system will allow you. Every system has its limits (whether it be the proccessor, video card, hard drive, memory ... whatever when it comes to overclocking). Just remeber that when you push your fsb up (i.e. 110), your memory will also be pushed up (110+33=143mhz). And who knows how fast your memory can run!

 

[Usul]

Host +PCI is the way to do it.