ABIT KA7-100 SDRAM timings and Virtual Channel memory timings

[MSS]

My ABIT board won't POST with Virtual Channel memory so back to PC133 SDRAM for now. Can someone share the best settings for:
DRAM Bank Interleave,Delay DRAM Read Latch and MD Driving strength? I have Infineon PC133 Cas2 7.5ns. My Bank DRAM timing is set to 8ns and SDRAM cycle length to 2. Also my DRAM Bank Interleave is set to disabled maybe I need to set it to 2 way interleave for VC memory. Thanks in advance.🙁

 

[MSS]

Hey Insane3d, where the heck are you? You must know this answer. Help me out.

 

[jmsazul]

It's stated in the ABIT's website that the KA7 and KA7-100 doesn't support VC memory. Check them out.

 

[Pederv]

Let's see, here's my memory settings, best as I can remember:
DRAM Timing: Turbo
Bank Interleave: 4-way
MD Drive Strength: Hi
DRAM Cycle Length: 2

I think I have most everything except for the hole at 15-16MB enabled. Running 512MB no problems.