A8V mem settings

[kuester01]

Hey folks

I bought a Asus A8V rev2, along with the 3200+.90 along with some OCZ 3200 EL Plat rev2. I had to do the 1 stick of ram and reflash thing to get it up and running , but that didnt hurt to bad

My question is Im confused about the ram timings. Ive never put any amount of effert into the ram and always bought low end cheapo stuff. According to the reveiws Ive seen with this simila set up, they set the ram timings at

cas Latency 2.0
ras to cas delay 3t
ras precharge 10t
precharge delay 2t
caommand rate 1t

Now the only option in the bios I see sililar to these is the cas latency, the others are mia, or do these settings have anything to do with them?

Burst length
TRC
TRFC
TRCD
TWR
TRWT
TRAS
TRP
TWCL
Asynclat


Oh well, any help would be appreciated


btw so far everything stock im at 2350, I gotta think theres more in the chip yet, Im running prime 95 atm



Jamie

 

[kuester01]

Ok, maybe it be easier if ya explain to me what the 2-2-2-5 settings are?







Jamie

 

[hmsrolst]

Bump because I'm a newbie to AMD and have the same question.

 

[Skoop]

TRC = Bank cycle time. Typically the sum of TRAS and TRP. Performance often better higher. Try 11.

TRCD = RAS to CAS delay

TRAS = RAS precharge

TRP = Precharge delay

Leave the other settings on auto. Try setting the timings above at what your RAM is spec'd for. You may have to relax TRCD if you get lockups. (Relax means set a higher number.)

 

[hmsrolst]

Thanks, Skoop.